Demon Slayer Hueforge

Project: Demon Slayer.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.72x240mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA Black Transmission Distance: 0.6

PLA White Transmission Distance: 5

PLA Red Transmission Distance: 4

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to White

At layer #19 (1.6mm) swap to Red for the rest.

You can increase the size but you must not increase the Z, only the X and Y.