Cute Green Tree Frog!

🐸 Feast your eyes on these super easy to print cute green tree frogs! 🐸 They are completely print in place and are funny to put around everywhere! I used black paint in my uploaded images for one of the frogs eyes, however have included a 3mf file for colour printers also!

Print Settings:

This design is fully print in place and works with Creality slicer’s default settings. For more detailed configurations, see below!

Seam: Back , Layer Height: 0.1-0.2mm, Infill Density: 15%, Infill Pattern: Default slicer or experiment with other patterns!, Print Speed: 50–60 mm/s, Support Type: Non-Required!, Support Density: Non-Required!, Bed Temperature: 60°, Material: I have only used PLA so far!