easter eggs

Home decorations for Easter (5 eggs without function and 2 as tealight covers with stands). Creality Ender 3 V3 printer and PLA material.

4 eggs printed in 50% scale of the STL file, 2 (black) in 65% scale of the STL file. Tealight eggs printed in 100% scale.

Tealight egg stand, made of 3 parts (two of them are glued together - the top plate and the leg). The lower flap is closed by turning (it has a hole for the switch and holes for the tealight legs - the last photo shows the type of tealight to which the model was adapted). So it is worth getting a similar one or, based on the STL files, adapt the stand to your tealight.

Of course, I recommend using an LED tealight.

The eggs themselves are only placed on the stand, so you can freely choose them for the stand, use a different color for the stand and the egg, etc.

Settings for brown (Polymaker Polyterra PLA) ones:

Layer height: 0.20

Line width: 0.42

Wall lines: 2

Filling: 10-15%

Print Speed: 300.00

Infill Speed: 300.00

Outer Wall Speed: 210.00

Inner Wall Speed: 240.00

Top Surface Skin Speed: 210.00

Top/Bottom Speed: 210.00

Cooling: ON

Ironing: OFF

Supports: OFF

For black ones - generic CR-PLA from the list in Creality Slicer.