Thumb screws for socket cap screws - Metric

This is a set of Thumb screw knobs for use with metric sized socket cap screws.

These are quick to print and simple to use. Simple tap the screw it - no need for glue or epoxy.

The perimeter of the opening where the screw is inserted has a number of ridges that lock in the screw. You will need a mallet or other tool to tap in the screw.

The knobs are for metric sized screws M4, M5, M6, M8 and M10.

The knobs were sized for standard screws. There is a an allowable range of tolerances for screws so you may need to shrink or expand the knob in the slicer. I suggest you print a sample to test fit.

3D Printing

A print setting is provided