Lockers / Wardrobe Kit Card & single parts - 1:24 diorama

Summary This is a 1:24 scale model of lockers in a kit card style.

Versions The kit card is available in a 3MF file for a one-color print. The individual lockers are available as separate files.

Print Print with 0.16 layer height or lower to bring up the details. No supports are needed. Use 3 perimeters and 10% infill.

Post processing The small struts can be removed really quickly and cleanly using a side cutter.

Dimensions at 100% scale (1:24) The fully assembled model has the following dimensions Height: 75mm Depth: 17.6mm Width: 16.6mm (single) - 31.1mm (double)

The kit card has the following dimensions when printed Height: 17.6mm Depth: 85mm Width: 82mm

Scaling is possible completely and without any limitations. Calculation formula using the example of target scale 1:18: 24 / [18] * 100 = 133% scale in your slicer

Other models I will also try to publish other car related garage / diorama models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work? I would be very happy if you would support my work on Ko-fi.