Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield — Фото 2 из 7

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield — Фото 3 из 7

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield — Фото 4 из 7

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield — Фото 5 из 7

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield — Фото 6 из 7

3D-модель · Creality Cloud

Intel Nuc 12 Slim 2.5'' Sata SSD Adapter Shield

Площадка: Creality Cloud
Цена: Бесплатно
Лицензия: CC-BY; Можно печатать, изменять и использовать в коммерции — с указанием автора.
Форматы: 3MF

6 Лайки
4 Загрузки
0 Напечатали
6 В подборках
0 Бусты
0 Комментарии
185 Просмотры

Автор:ChopperJan

Опубликована 26.06.2025

Скачать на

Creality Cloud

Описание

Hi everyone, this Design adds a Case for the Intel Nuc 12 Slim to hold a 2.5'' Sata SSD. You only need the flex cable to connect the sata port to the 2.5'' SSD and additionally 4x M3x8mm countersunk head screws to fix the SSD and two M3x16mm screws to fix the case. The special thing about this design is that the flex cable is hidden (gets pulled through the security lock hole) and the bottom of the normal NUC case can be removed without removing the 2.5'' Case. I hope you enjoy this design! 3D printing settings

I've printed it with - 4 lines (to get good stability) - 40% infill - small tree support for the hide of the flex cable - on a Prusa Mini with PLA

I think it will also be good with lower settings.