Happy Snail

🖨️ Recommended Printing Parameters: 🧱 Layer height: 0.2 mm 🧱 Walls/Perimeters: 2–3 💪 Infill: 15% – 25% 🧲 Supports: Only if necessary 🛏️ Bed adhesion: Not required, but if you’re unsure, use a brim or raft 🌡️ Extruder temperature: 195–205 °C (PLA) 🔥 Bed temperature: 50–60 °C (PLA)

💬 ALL FILES ON MY PROFILE ARE MEANT TO BE PAINTED; THEY ARE NOT OPTIMIZED FOR MULTICOLOR PRINTING. 💬 If you have any questions, feel free to message me! ❤️ Thank you for your support! Follow my profile so you don’t miss any designs and discounts. ------------------------------------------------------------------------------------------------------------------------------------- 🖨️ Recommended Printing Parameters: 🧱 Layer height: 0.2 mm 🧱 Walls/Perimeters: 2–3 💪 Infill: 15% - 25% 🧲 Supports: Only if necessary 🛏️ Bed adhesion: Not required, but if you’re unsure, use a brim or raft 🌡️ Extruder temperature: 195–205 °C (PLA) 🔥 Bed temperature: 50–60 °C (PLA)

💬 ALL FILES ON MY PROFILE ARE DESIGNED FOR PAINTING AND ARE NOT OPTIMIZED FOR MULTICOLOR PRINTING. 💬 If you have any questions, feel free to message me! ❤️ Thank you for your support! Follow my profile so you don’t miss any designs and discounts.