Perkins 1000 KVA TAG4001A GENERATOR

HELLO, THIS PRODUCT IS PURELY AN ENGINEERING PROJECT AND MY OWN DESIGN. BY SUPPORTING ME, YOU CAN PURCHASE THE PRODUCT. THERE ARE NO ISSUES WITH THE DRAWINGS. IF YOU ENCOUNTER ANY PROBLEMS, YOU CAN CONTACT ME AT djbekem28@gmail.com.

YOU CAN PRINT THE ENGINE BODY, CRANKSHAFT, AND PISTONS WITH CF FILAMENT TO MAKE THEM MORE DURABLE AND HEAT RESISTANT. IF YOU WANT TO PRINT THEM IN PLA, I RECOMMEND USING AN N20 MOTOR. THERE ARE ADDITIONAL PARTS IN THE DRAWING, WHICH INCLUDE THE MOTOR CONTROL, N20 MOTOR, AND PULLEY BELT (YOU CAN ALSO USE A RUBBER BAND).

IN MY K2 COMBO, I RECOMMEND PRINTING AT A 0.2MM LAYER HEIGHT, 3 WALLS, TOP AND BOTTOM, WITH 25% INFILL. I DO NOT RECOMMEND GOING LOWER OR HIGHER THAN THIS. (FOR SUPPORT, IT WORKS WHEN PRINTED WITH 45-DEGREE AUTOMATIC SUPPORT). YOU NEED TO INSTALL 2 PULLEYS WITH AN 8MM INNER DIAMETER AND 22MM OUTER LENGTH, AND YOU DO NOT NEED TO INSTALL A 24MM ROUND MOTOR FOR THE FAN. YOU CAN DESIGN THEIR DRAWINGS SEPARATELY AND INDEPENDENTLY. HOWEVER, SELLING THEM IS PROHIBITED.