Kratos God Of War Funko Pop Chibi

Layer Height: 0.12mm (Highly Recommended). A smaller layer height is essential here to capture the fine textures of the leather armor, the details on the axe blade, and to keep the top of the bald head perfectly smooth without stepping lines.

Infill: 10% - 15% (Grid or Gyroid). The head is large, so keeping the infill at 10% inside the head will prevent the figure from becoming top-heavy while saving filament.

Wall Line Count (Perimeters): 3 Walls. Essential to give the sharp edges of the axe and armor a crisp look, and to ensure the smooth head has a strong outer shell.

Supports: Yes (Tree/Organic MANDATORY). You will definitely need supports under the Leviathan Axe, the hands, and the bottom of the thick beard. Tree supports are perfect for this as they will support the axe without leaving ugly marks on the armor below it.

Print Speed: 40 - 50 mm/s. Slow down the outer walls to around 25-30 mm/s to ensure the 3D printer perfectly outlines the tiny details on the axe and the belt buckles.

Build Plate Adhesion: Brim. Because the large head and the extended axe make the figure slightly unbalanced, a Brim is strongly recommended to lock the base perfectly to the bed.

Design Concept

This model is inspired by a prominent character from a popular video game, designed to capture its fierce and imposing nature in a fun, stylized format.

Usage

Ideal for fans of the character as a collector's item or as a decorative piece to add personality to a gaming setup or display.

Printing Tips

It is recommended to use a filament that captures fine details and a color palette that matches the character's outfit and markings. A small layer height will help in achieving the intricate patterns on the clothing and weapon.

Assembly Instructions

This model is likely one piece. If separate parts are involved (such as the base being detached), simple glue should suffice for assembly. Ensure all parts are clean and dry before assembly to ensure the best adhesion.