Butterfly-type ball valve wrench, 1/2", 3/4", 1"

A tool designed to facilitate the opening and closing of ball valves.

General operating guidelines:

1. Do not apply excessive force. The wrench, made of special polymer (3D printed), is durable but softer than most household valves. Sudden jerks or excessive pressure will deform the tool, damage the stem, or break the seal. Rotate smoothly, controlling the applied force. If the valve does not yield — stop and assess the situation.

2. Do not use on faulty valves. The tool is intended only for functioning valves that require extra force due to worn seals, scale buildup, or age. If the valve is jammed, has body cracks, leaks, or a deformed stem, using the wrench is strictly prohibited: this may cause valve rupture and emergency depressurization. In such cases, call a professional.

3. Check compatibility before purchasing. Review the product card: ensure the dimensions of the wrench and valve match, and that the materials are suitable for the operating conditions. Read the instructions carefully. If in doubt, contact the seller before ordering to avoid returns and incompatibility.

4. Observe proper storage and care. Regularly inspect the mating surfaces for scratches, chips, and dirt that can impair grip. Store in a dry, clean place. Do not modify the tool or use it for unintended purposes. Careful operation will extend the service life of both the valve and the tool.

5. Consider the valve design. Due to its adaptability to different sizes and the lack of a single standard, the wrench has no rigid fixation or auto-grip. It does not hold itself under load. During operation, continuously hold the tool by hand, controlling its position and preventing slippage. Pay special attention to non-standard or worn valves. Smooth rotation and manual control compensate for the lack of fixation.

Usage instructions:

Step 1. Check the valve for proper operation. Try turning the handle manually. The rotation should be smooth, without sticking. The wrench is designed for valves requiring increased force due to wear or deposits. Do not use the tool on jammed or damaged valves — there is a high risk of stem breakage, tool damage, or injury.

Step 2. Verify the dimensions. Ensure the wrench dimensions fully match the parameters of your valve (specified in the product card). A mismatch will lead to slipping, uneven loading, and deformation of the mating area. If there are multiple configuration options, select strictly according to your valve's marking.

Step 3. Assess the available space. Check the turning radius and the lifting height of the tool. Make sure there are no pipes, walls, furniture, or utilities around the valve that restrict movement. Lack of space risks loss of control, jamming, or damage to adjacent components. Clear the area if necessary.

Step 4. Secure your grip. Firmly grasp the working part of the wrench, without loosening your hold until the operation is complete. To prevent slipping, press your hands firmly. When applying significant force, use both hands or take short pauses to regain control. Do not let go of the tool until the valve is in the desired position.

Step 5. Perform the operation. Accurately align the mating part with the valve, avoiding any misalignment. Begin rotating smoothly and evenly, applying controlled force without jerks. Once fully opened or closed, stop, remove the wrench, check the handle position and ensure there are no leaks. After use, wipe the tool with a dry cloth, inspect it for damage, and store it in a dry place.

Disclaimer - all graphical, textual, and video materials, as well as the model design, are copyrighted; copying and distribution are prohibited.