Castle Dice Tower & Catch Tray | D&D Set | Catan

🏰 Roll like a true adventurer. DiceForge is a hex "castle keep" dice tower with a matching oversized catch tray — designed for tabletop RPGs, D&D nights, and board games. Drop your dice in the crenellated top and watch them tumble down three internal 45° baffles, hit the sloped exit chute, and roll out the gatehouse window onto the tray. Fair, randomized rolls every time — and your dice never fly off the table.

✨ Why you'll love it

100% support-free — prints standing with zero supports. Every baffle underside sits at the 45° printable limit; the exit chute is the top of a solid wedge. Real working mechanism — full-width staggered baffles guarantee a proper tumble (no straight-through drops). Matched 2-piece set — castle tower + a big 165 × 140 mm catch tray that keeps dice corralled. Tabletop-ready details — crenellated battlements, chamfered base plinth, and 6 arrow-slit accents for that authentic keep look. Watertight, validated geometry — both pieces are manifold and print-clean. 🖨️ Print settings (recommended)

Material: PLA or PETG Nozzle: 0.4 mm | Layer height: 0.2 mm Supports: None Infill: 10–15% Orientation: tower stands upright (as oriented); tray prints floor-down Est. filament: ~340 cm³ total for both pieces 📦 What's in the kit (print 1 of each)

diceforge_castle_dice_tower — 92 × 90 × 158 mm diceforge_castle_dice_tray — 165 × 140 × 30 mm Fits any 250 mm bed. Looks great in stone-grey, bronze, or marble PLA. Happy rolling! 🎲