Customizable Cryptex (5, 6, 7, 8 or 10 Letter Wheels) – Remi

Boost Me

HIT ME

Boost

Description for Creality Cloud ⚠️ ATTENTION

This is NOT my original design. All credits go to the original creator, Cees, on Printables.

This is NOT my original design. All credits go to the original creator, Cees, on Printables.

🔗 Original Source: Printables - Cryptex Model 🇬🇧 English Description An amazing mechanical Cryptex container perfect for secret messages, gifts, puzzles, or custom escape room props!

This design allows you to assemble a working combination lock vault using 5, 6, 7, 8, or 10 letter wheels. You can set your own custom password by aligning the inner rings with your chosen letters or numbers.

Key Features: Modular Configuration: Choose between 5 to 10 letter wheels depending on how long you want your secret password to be. Fully Mechanical: Works entirely with 3D printed mechanical tolerances (no extra hardware required for basic assembly). Secret Storage Space: Perfect for small gifts, rolled notes, USB drives, or money. Printing & Assembly Advice: Material: PLA or PETG works great. Layer Height: 0.16mm or 0.20mm for clean letter details and smooth rotation. Infill: 15% - 20% grid or gyroid. Tolerances: Make sure your printer is well-calibrated so the gear rings snap into place smoothly without excessive force.

English An amazing mechanical Cryptex ideal for storing secret messages, gifts, puzzles, or for use as a prop in escape rooms!

This design allows you to assemble a functional combination lock vault using 5, 6, 7, 8, or 10 letter wheels. You can configure your own custom password by aligning the inner rings with your chosen letters.

Key Features: Modular Configuration: Choose between 5 and 10 wheels depending on the length of your preferred password. Fully Mechanical: Works entirely with 3D printing tolerances (requires no additional screws or external hardware). Secret Compartment: Perfect interior space for rolled notes, keys, USB drives, or money. Printing & Assembly Tips: Material: PLA or PETG work excellently. Layer Height: 0.16 mm or 0.20 mm to achieve crisp letters and smooth rotation. Infill: 15% - 20% (Gyroid or Grid). Tolerances: Make sure your printer is well-calibrated so the rings fit with a clean snap without forcing the plastic.