Zipper Pull Replacements #05 – Snap-On Zip Pulls for Jackets, Backpacks, Tents & Bags | 4 Sizes, Sets of 3

**Zipper Pull Replacements #05 — part of the Fix-It Kit series: spare parts for the things that break most often at home.** A broken zipper pull usually means a jacket or backpack you can not close. These snap-on pulls click onto the slider bridge without tools: push the thin wire loop through the narrow slot and it locks in the round hole. Small for jeans and pockets, medium for jackets, large for backpacks and tents, and a glove-friendly size for winter.

### All sizes in one download - **small · 25 mm** — `fx05_zipper_pulls_small_25mm_x3.stl` (32 × 28 × 3 mm) - **medium · 35 mm** — `fx05_zipper_pulls_medium_35mm_x3.stl` (38 × 39 × 3 mm) - **large · 45 mm** — `fx05_zipper_pulls_large_45mm_x3.stl` (44 × 50 × 3 mm) - **glove size · 55 mm** — `fx05_zipper_pulls_glove_55mm_x3.stl` (53 × 61 × 3 mm)

You get every version as a separate STL (in the ZIP, with a README) plus one 3MF project with all versions.

### How to choose and use - push the thin wire loop (bridge) of the zipper slider through the narrow slot - it clicks into the round hole - slot 1.2 mm / hole 2.6 mm: fits slider bridges of about 1.3-2.4 mm - small for jeans / pockets, medium for jackets, large for backpacks / tents, glove size for winter wear - each file = 3 pulls

### Good to know - **Digital file only.** You get 3D printing files — no physical item is shipped. Screws, nuts and bolts are not included. - **Made with AI:** designed with AI assistance (declared according to Cults rules). Pictures are renders, not photos of a printed part. - Built on standard dimensions; meshes are checked (watertight). Not physically test-printed yet — measure your part first, and please post a Make if you print one!

License: personal use only. Please do not share or resell the files.