Dandadan Hueforge - Okarun - Turbo Granny Form

Would love to see your prints!

Every boost helps me create more hueforges and give back to the community! :)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 230x135.13mm in size You may print at higher layer heights below the Min Depth of 1.4mm The Max Depth is 3mm and the Actual Depth is 2.5mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Red At layer #22 (1.84mm) swap to Latte Brown At layer #25 (2.08mm) swap to Jade White for the rest.