Deadpool I Heart Pose - Bookmark

Back Story

Deadpool gets his own collection. Deadpool is a fanboy and I am a fan of Deadpool. He gets special treatment.

Deadpool: I Heart Pose bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 47x150mm in size.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked , adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale , adjust the Z axis back to 100% , slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments

Swap Instructions: Start with Black At height depth (0.96mm) swap to Jade White At height depth (1.36mm) swap to Black At height depth (1.68mm) swap to Red for the rest.