Бесплатно 
Peg Jump Game with Built-In Storage
MakerWorld
3D-модель · MakerWorld
I.Q. Tester Peg Game Piece
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC
- Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
- Форматы
- STL
- 5 Лайки
- 55 Загрузки
- 36 Напечатали
- 15 В подборках
- 4 Бусты
- 1 Комментарии
- 0 Просмотры
Описание
This is a game piece or ‘peg’ for “The Original IQ Tester" Peg Game. My parents had one but many of the pieces broke or were lost, so I got out my calipers, measured a peg and quickly designed a replacement piece in TinkerCad.
The peg dimensions are 7.7 mm wide x 36 mm tall, with a 3 mm wide tip.
There are many other complete Peg Jump games with boards and built in storage that can be found online, this model is just the peg itself if you already have the original game and just need some replacement pieces.
Recommended Print Settings
- Material: PLA or PETG - Layer Height: 0.2mm - Infill: 15% - Supports: None - Bed Adhesion: Brim - Auto or 5mm width Hope someone else can find this useful! Thanks for checking it out.
(I am not associated with “The Original Peg Game” or pegame . com website)
Руководства и профили печати
Профили печати и шаги
0.2mm layer, 2 walls, 15% infill - Material: PLA - Layer Height: 0.2mm - Infill: 15% - Supports: None - Bed Adhesion: Brim - Auto or 5mm width Use Clone/Duplicate to create more pieces. A game board uses 14 total (one peg missing out of 15 holes) for a complete set.
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.
Комментарии