Porsche 911 - Hueforge

This is 4 colour Hueforge of Porsche 911.

I uploaded two sizes 200x150 X1/P1/A1 and size 180x135 for A1 Mini.

And thicker version with no border size 200x150. Swap instructions in profile description.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

If you want stand for this print check out my Simple vertical stand .

For my Hueforge pictures with border choose the version with 3 mm gap.

If you like this picture, you can look at my other car pictures here in this collection: https://makerworld.com/en/collections/3529230

Boost Me I print all of my creations myself. If you like my work, pls send me a boost, it will help me make more. Feel free to PM me if you have some idea for a nice picture. Thank you.

Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 4.8 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 3.2 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #11 (0.96mm) swap to Jade White At layer #20 (1.68mm) swap to Black At layer #21 (1.76mm) swap to Sunflower Yellow At layer #26 (2.16mm) swap to Jade White for the rest.