Broly Hueforge - 2 versions

200mm x 200mm Broly Hueforge - 4 color If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

Broly Hueforge - 4 color

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 3.1mm and the Actual Depth is 2.8mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 PLA BambuLab Basic Bright Green Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5.8 This print uses 4 unique filaments

***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to BambuLab Green At layer #19 (1.6mm) swap to Bright Green At layer #24 (2mm) swap to Jade White for the rest.

Check out my Anime Collection here

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

200mm x 200mm Broly Hueforge - 7 color If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

Broly Hueforge - 7 color

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 1.1mm The Max Depth is 4.2mm and the Actual Depth is 3.6mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4 PLA PolyLite Cream Transmission Distance: 2.7 PLA BambuLab Basic Jade White Transmission Distance: 5.7 PLA BambuLab Basic Mistletoe Green Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 PLA BambuLab Basic Bright Green Transmission Distance: 4 This print uses 7 unique filaments

***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #28 (1.24mm) swap to Cocoa Brown At layer #31 (1.36mm) swap to Cream At layer #42 (1.8mm) swap to Jade White At layer #54 (2.28mm) swap to Black At layer #57 (2.4mm) swap to Mistletoe Green At layer #59 (2.48mm) swap to BambuLab Green At layer #65 (2.72mm) swap to Bright Green At layer #75 (3.12mm) swap to Jade White for the rest.

Check out my Anime Collection here

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!