3D-модель · MakerWorld

DnD Dungeon Entrance Miniature

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
F3D
  • 46 Лайки
  • 39 Загрузки
  • 19 Напечатали
  • 132 В подборках
  • 1 Бусты
  • 6 Комментарии
  • 0 Просмотры

Автор:MikeGyverMinis

Опубликована

Описание

DnD Dungeon Entrance Mini

Enter if you dare!

Ready to be painted.

Boost Me If you really like this design, Boost Me. Helps with future projects.

This is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.

Руководства и профили печати

Профили печати и шаги

X1 Series, P1 Series, A1 only Settings:

- Quality - Wall generator: Arachne - Order of Walls: Inner/Outer/Inner - Seam: Back - Strength - Wall Loops: 2 - Infill 15% Gyroid - Support - Enable Support: Checked - Type: tree(auto) - Style: Tree Organic - Support Critical regions only: Checked - On build plate only: Checked - Advanced - Top Interface Layers: 1 - Bottom Interface Layers: 1 - Top Z distance: 0.09 - Bottom Z Distance: 0.09 - Others - Brim Type: No-Brim

A1 Mini Only Settings:

- Quality - Wall generator: Arachne - Order of Walls: Inner/Outer/Inner - Seam: Back - Strength - Wall Loops: 2 - Infill 15% Gyroid - Support - Enable Support: Checked - Type: tree(auto) - Style: Tree Organic - Support Critical regions only: Checked - On build plate only: checked - Advanced - Top Interface Layers: 1 - Bottom Interface Layers: 1 - Top Z distance: 0.09 - Bottom Z Distance: 0.09 - Others - Brim Type: No-Brim

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.