Knitted Octopus

Separate Eyes, 2 Plates, 0.12mm layer, 2 walls, 10% infill No AMS needed!

Need to glue eyes.

AMS, 0.12mm layer, 2 walls, 10% infill

A1 mini compatible, 1 plate, print by object This is a tweaked print profile that works with all printers — even the A1 mini — and prints by object to help cut down on filament waste.

A big thanks to Smoggy3D for the model.

All Parts on One Plate (Print by Object — AMS required) Identical to the original with split parts, but everything is on a single plate for both speed and convenience . Works on everything from A1 Mini on up.

- Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects. - Be sure the print sequence remains “Print by Object” or you'll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile. If you like this profile, please remember to rate it , boost the designer and explore their other models. If you really like this profile, feel free to  check out my models as well and boost one (or more) of them if you have boosts to spare. 😊

双色一盘速打，打印效率高

Mini single color version - 0.12mm layer, 2 walls, 7% infill