Steampunk Gargoyle created with AI's

Steampunk Gargoyle model created using Gemini AI for the image and Backflip AI for 3d generation.

Successfully printed on a Bambu A1 and a Flashforge Adventurer 5m..

Print using:

.2mm layer height

3 walls

5 top shell layers

4 bottom shell layers

15% Gyroid Infill (for best strength)

Support:

Tree Auto/Tree Organic

On Build Plate Only

Generic PLA Filaments were tried.

If you encounter stringing or adhesion issues change the temps to the recommended values for your filament.

Carefully remove supports wire snips or needle nose pliers.

Breaking the tree structure in parts may work better before detaching from model. Be especially careful with

the ones on the bottom and around the back feet and tail tip.

If the brim doesn't come off easy enough for you try setting the Brim-Object Gap to 0.2.