3D-модель · MakerWorld

DJI Goggles v2 Skadis Holder

Площадка: MakerWorld
Цена: Бесплатно
Лицензия: CC-BY-NC-SA; Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы: 3MF

85 Лайки
362 Загрузки
169 Напечатали
170 В подборках
11 Бусты
17 Комментарии
0 Просмотры

Автор:Julian Hof

Опубликована 28.12.2023

Скачать на

MakerWorld

Описание

Hello

this is a holder for the DJI Goggles V2 for the IKEA skadis wall.

You can easily hang on your goggles v2 and it is very minimalistic and looks very cool.

Руководства и профили печати

Профили печати и шаги

0.2mm layer, 3 walls, 15% infill i printed it with PETG and 0.2 layerheight, with 3 Walls and 15% infill

Vertical tree support 0.2mm layer, 3 walls, 15% infill I made a minor cut to the end of the halter to allow for better bed adhesion and printed it vertically with tree supports and custom interface spacing.

I found the original version laying on its side led to one side having very rough markings from the supports.

So I changed it to Arachne, 3 walls, with 15% gyroid infill. Added some variable layer height at the bottom and custom tree supports to minimize any rough spots on the final print. Only needed very minor deburring and turned out great.

- Feel free to print at a slower speed and 0.16mm layer height for better results.

Printed with gray Sunlu PLA+2.0 but any regular PLA should work fine.