Jason 3 color Hueforge

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Jade White At layer #17 (1.44mm) swap to Red At layer #28 (2.32mm) swap to Black for the rest.