Mini Easter Egg Surprise Box w/ & w/o Bunny Ears
Mini Easter Egg Surprise Box w/ & w/o Bunny Ears — Фото 2 из 4
Mini Easter Egg Surprise Box w/ & w/o Bunny Ears — Фото 3 из 4
Mini Easter Egg Surprise Box w/ & w/o Bunny Ears — Фото 4 из 4
3D-модель · MakerWorld

Mini Easter Egg Surprise Box w/ & w/o Bunny Ears

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 1 244 Лайки
  • 3 627 Загрузки
  • 2 362 Напечатали
  • 3 306 В подборках
  • 262 Бусты
  • 343 Комментарии
  • 0 Просмотры

Автор:AdrianS

Опубликована

Скачать на MakerWorld

Описание

This model is a unique, modern take on an Easter egg. With or without bunny ears. Designed with a ribbed texture for a stylish look, it comes apart into two halves, making it perfect for storage or decoration.  It fits the classic Kinder Surprise perfectly as well as money for a unique easter present.

⚠️ 2026 - Version now available! → CLICK HERE

This is the miniature version of my larger Surprise Egg. It has been designed from the ground up. The locking mechanism has been optimized for its smaller scale.

Print profile has been optimized for fast and efficient printing with as few retractions per layer as possible..

Ideal for Easter gifts, candy holders.

Руководства и профили печати

Профили печати и шаги

V2 - 13cm - WITH Ears - 0.2mm layer, 3 walls, 0% infill V2

Thank you for all the feedback. I made some adjustments to the print profile to optimize for different printer conditions.

Changes made:

- Slow down for Overhangs (only for the Bottom Part of the Bottom Half) + wider Infill for this Part - This should hopefully fix the print defects some Users were experiencing - Changed the Infill pattern for the top half for more reliable top layers - This should fix any holes that were visible due to line sagging.

Custom Infill and supports added where needed.

The Brim is needed for reliable printing on the top shell. It has a 0mm gap but can be removed easily after printing.

V2 - 8cm - NO EARS - 0.2mm layer, 3 walls, 0% infill V2

Thank you for all the feedback. I made some adjustments to the print profile to optimize for different printer conditions.

Changes made:

- Slow down for Overhangs (only for the Bottom Part of the Bottom Half) + wider Infill for this Part - This should hopefully fix the print defects some Users were experiencing - Changed the Infill pattern for the top half for more reliable top layers - This should fix any holes that were visible due to line sagging.

Custom Infill and supports added where needed.

The Brim is needed for reliable printing on the top shell. It has a 0mm gap but can be removed easily after printing.

color ears_0.2mm layer, 3 walls, 0% infill

Теги

eastereaster2025ostern-eieggeastereggeaster eggbunnybunny earsribbedmodernstylishfastquickdecorationstorageboxsurprisegiftgeschenkcandy bowloptimized
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.