Бесплатно 
Webcam Stand
MakerWorld
3D-модель · MakerWorld
Webcam Logi Brio 100 stand for slim edge monitor
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC-SA
- Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
- Форматы
- 3MF
- 113 Лайки
- 896 Загрузки
- 602 Напечатали
- 410 В подборках
- 31 Бусты
- 66 Комментарии
- 0 Просмотры
Описание
This nice webcam has two cons: a stiff cable and no capacity to pan, so I designed this stand to correct that.
The support has following features:
- Friction pan is stiffer than the cable stiffness, webcam will stay in place - Stand fits slim border screens, up to 2mm. - There is a “compartment” that allows to add ballast for better stability (use small nuts or pebbles). - Web cam is set back, to give a little more depth - Webcam is embed without modification by resilient claw. Compatibility List:
- Brio 100 - C 270
The design allows easy remixes, feel free to do I hope you will find it useful Give me news
Руководства и профили печати
Профили печати и шаги
0.2mm layer, 2 walls, 15% infill - I advise to support the box for hinge in the big bracket, no support for the “compartment”, no support else where. - On top works there are 1.75mm holes to block parts together by inserting filament, you may have to pass with a drill bit 1.7mm if you want hard fixation or 1.8mm if you want to keep the possibility to dismount the assembly - On foot drill one lug 1.8mm and 1.7mm the second lug, insert filament in the 1.8mm hole and push through the 2mm foot hole (no need to rework) make the hinge.
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.