Бесплатно 
multiboard paint bottle holders 21mm - 38mm tilted
MakerWorld
3D-модель · MakerWorld
HSW paint bottle holders 20mm - 37mm tilted
Сведения о модели
- Площадка
MakerWorld
- Цена
- Бесплатно
- Лицензия
- CC-BY-NC
- Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
- Форматы
- 3MF
- 104 Лайки
- 339 Загрузки
- 225 Напечатали
- 249 В подборках
- 28 Бусты
- 46 Комментарии
- 0 Просмотры
Описание
Paint bottle holder in sizes 20mm to 37mm, angled for easier access. + 40mm 42mm 44mm
Mounted directly to HSW.
Boost Me I live to create !!!
If you need a different size, let me know and we'll see what we can do.
Here are variants for MultiBoard
36mm
HWS airbrush holder
Fully compatible with https://makerworld.com/en/models/22521-honeycomb-storage-wall?from=search#profileId-27457 .
Thanks to https://makerworld.com/en/@rostap for releasing his oryginał design under Creative Commons Attribution-Noncommercial
Руководства и профили печати
Профили печати и шаги
even 20-36mm 0.2mm layer, 2 walls, 15% infill Advice to use support blockers and support - included in printing profile
odd 21-37mm 0.2mm layer, 2 walls, 15% infill Advice to use support blockers and support - included in printing profile
40, 42, 44mm 0.2mm layer, 2 walls, 15% infill 39mm+ are too wide and don't fit in the adjacent holes, you have to be creative :)
Advice to use support blockers and support - included in printing profile
requested 58.24 with 2 HSW connectors 0.1mm tolerance in bottle diameter
Похожие модели
Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.