Mac Miller - GOOD AM

Mac Miller - GOOD AM

Other Mac Miller fanart and other artist can be found here: https://makerworld.com/en/@Noahs_A_Noobie/upload

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x199.37mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Overture White Transmission Distance: 4.4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

IGNORE IF USING AMS

Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #16 (1.36mm) swap to White or Light Grey At layer #24 (2mm) swap to Jade White for the rest.