Bosch Indego XS Wheel replacement - 608RS bearings

! I recommend printing in PETG with PLA support interface, make sure to select the correct print profile !!

I needed a replacement set of front wheels for my robot mower. The original wheels got jammed and were worn. After looking around a bit, i only found some replacements that needed specific bearings or were a nightmare to get printed correct.

I had some 608RS bearings laying around (basic skateboard bearings) and deciced i wasn't going to buy some weird bearings. Opened fusion, drew some objects and on the 2nd print i got it functional. (first print was to check for tolerances/shrinkage). You can buy the ones i linked from Bambu, but i recommend you look on the known shopping sites, as CLOSED bearings will probably last longer than open ones.

I printed this in PETG black, with PLA support interface. You can probably do without the PLA interface, i just like the ease of use.

You will need to print 2 wheels and 4 half axles. You will also need 4 608RS bearings. I reuses the original screws to screw it back together.