Mushroom - Bookmark

0.08mm layer, 1 walls, 100% infill Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 55x163.62mm in size You may print at higher layer heights below the Min Depth of 0.88mm The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used: PLA Aurapol L-EGO RED Transmission Distance: 2.9 PLA Aurapol Black Transmission Distance: 0.4 PLA Aurapol Grandma Gray Transmission Distance: 3.7 PLA Aurapol White Transmission Distance: 2.7 This print uses 4 unique filaments

Swap Instructions: Start with L-EGO RED At layer #11 (0.96mm) swap to Black At layer #13 (1.12mm) swap to Grandma Gray At layer #20 (1.68mm) swap to White for the rest.