Darth Vader Tie Fighter Gyro Spinner

0.2mm layer, 3 walls, 15% infill

Brim for Tie Fighter for Beds with Poor Adhesion

25m PLA Basic + Easily Removable Inner Brim = Less Failure 0.24 layers

inner brim spaced 0.2 from first layer

0% infill

faster print speed, aprox 75% faster.

AMS Multi-Color version Print without support. This should resolve the issue with the TIE breaking off during the print. Additionally, it adds a touch of color with the center ring and the window of the TIE red, while the Death Star laser is green. This is the smoothest spinning gyro I've ever printed.

I used my X1C and AMS, and it took me four hours to print. Although it’s a lengthy process, the resulting colors are truly remarkable.