Pocket Copter

0.16mm layer, 2 walls, 15% infill - 0.16mm Layer Height - No Support - All parts on one plate

Longer keys for A1 Mini 0.16mm layer, 2 walls, 15% infill Longer keys so the propeller flies way higher

Sized for A1 Mini

Simply choose the plate you like to print

(same settings as the original)

Use the longer key for double the height and the extremly long key for triple the height!

0.16mm layer, 2 walls, 15% infill

3 replacement rotors only 0.16mm layer A1 mini Love the pocket copter, but my son has a way of losing or breaking the rotors. I made this profile to simplify printing replacement rotors.

0.2mm layer, 2 walls, 15% infill petg

2 Pocket Copters | A1 Mini Friendly Print 2 Pocket Copters at once! Designed to fit A1 Mini as well.

2 Color AMS: 0.16mm layer, 2 walls, 15% infill • 2 Color print

• Print by object

improved screw fit; added spare consumable parts in plate 2 Re-uploading this profile as per guidance from BBL support.

As before: this profile uses x-y hole compensation to improve the fit of the screw. I include a 2nd build plate with just extra consumables.

0.16mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill, 2 colors, NO AMS REQUIRED - 0.16mm layer - 2 walls - 15% infill - 2 colors - NO AMS REQUIRED - 2 plates

4 two-color replacement rotors Prints 4 rotors with a simple multi-color design that requires very little wasted filament. My kids leave these all over the yard, so I like adding the white edge to them to make them stick out in case the other color blends in with whatever it's lying on.

4 three-color replacement rotors Prints 4 rotors with a simple 3-color design that requires very little wasted filament. My daughter wanted them to be more colorful so I made it 3 colors instead of 2 and am uploading it as a print profile so I can print spares from Bambu Handy.

0.2mm layer, 2 walls, 15% infill, PETG, 6x rotors Printed in PETG for more durability

0.16mm layer, 2 walls, 15% infill Default print with different PLA Matte colors

Optimized with toroidal prop(credit to asprint) and long key

0.16mm layer, 3 walls, 15% infill 单盘分色打印，AMS

0.2mm layer, 2 walls, 15% infill Printed with Elegoo Rapid PLA+

Printed in approximately one hour on my A1 mini

0.2mm layer, 4 walls, 35% infill a spinning top that can be launched from the pocket copter

150mm Blade, Longer Key, 0.16mm layer Larger 150mm blade with a longer key.

The blade has some quality issues , but still works perfectly! (Might be because of my filament)

STAND for Copter - 0.17mm layer, 2 walls, 15% infill Questo modello serve per poter sostenere tutte le parti dell'elicottero giocattolo in un unica soluzione

- altezza primo layer: 0.2mm - altezza layer: 0.17mm (per un maggiore dettaglio e precisione) - nessun supporto - 2 walls - 15% infill Vi rimando al mio link del modello originale se vogliate sostenere il mio lavoro e il modello originale: https://makerworld.com/it/models/1299828-stand-for-agepbiz-s-pocket-copter#profileId-1331941

0.16mm layer, 2 walls, 15% infill 0.12MM layer height.

Huge version - 0.2mm layer, 2 walls, 10% infill 2x the origional version

0.16mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill My handle prints failed 3 times for this so I turned the handle upside down and added supports so it wouldn't fall over during print.

Use this if your original handle print failed and you just need a handle.

Used 0.20mm profile and 0.16mm profile screw fits better now.

REPLACEMENT KEY - 0.16mm layer, 2 walls, 15% infill This print profile is a replacement key for the pocket copter as I found myself breaking or losing the key often. This gives you guys an easy way to get a replacement key.

Storage rack for rotors Simple storage rack for spare rotors. Requires no supports.

0.16mm layer, 2 walls, 15% infill