Modular Moss pole 60MM stake for houseplants

Full set mosspole parts - 0.16mm layer, 2 walls, 20% infill

Added Support on the Top 0.16mm layer, 2 walls, 15% infill Ich habe oben Support hinzugefügt um das Bridging zu vermeiden. Damit sieht das Endprodukt etwas besser aus.

A1 Mini Sized Version All Plate Options Many options for quantities and plate arrangements

SUPPORTLESS - 0.2mm layer, 2 walls, 15% infill Mir gefällt dieser Moos-Stab sehr gut. Da ich jedoch wie einige andere auch Probleme mit der Druckbetthaftung hatte und entweder sehr hohe Stützen oder Brücken erforderlich waren, habe ich das Modell etwas modifiziert. Somit werden keine Stützen oder Brücken benötigt.

Danke an den ursprünglichen Ersteller dieses sehr schönen Modells!

A1 mini Version, h=17cm, 0.16mm layer, 2 walls, 15% infill 0.16mm layer, 2 walls, 15% infill Gyroid

A1 mini version of mosspole only this is the mosspole only for A1 mini, because if you would like to extend the mosspole, then you dont need the other stuff

Base stand outside 0.2mm layer, 3 walls, 15% infill A base for the moss stick provides more stability and ensures a level stand.

The base goes into the bottom of the pot and is covered with soil.

Diameter 120 to 240 in 20mm increments

Base stand center 0.2mm layer, 3 walls, 15% infill A base for the moss stick provides more stability and ensures a level stand.

The base goes into the bottom of the pot and is covered with soil.

Diameter 120 to 240 in 20mm increments

with brim only pole 0.2mm layer, 2 walls, 20% infill 5h prin

0.16mm layer, 2 walls, 15% infill Eine Folie zum einlegen im Moosstab was die offene Fläche um die hälfte reduziert so dass das Moos langsamer austrocknet.

Optimale Einstellung gegeben.

Dies ist ein Remix von https://makerworld.com/de/models/1172486-a5-sheet-of-paper?from=search#profileId-1180969

0.2mm Reinforced & Shielded (50% Back Cover) Improved Modular Moss Pole (Enhanced Stability & Directional Growth)

This is a remixed print profile engineered to solve the most common issues with standard modular moss poles: instability, fast drying, and messy root growth.

What’s Improved in this Remix:

- Reinforced Structure & Extra Stability: Stronger wall connections and an upgraded joiner mechanism prevent wobbling when extending the pole with multiple segments. - 50% Solid Back Shield (Directional Growth): Half of the pole is now solid. This guides the plant's front roots directly into the moss, keeps the back clean, and dramatically slows down moss evaporation. - Optimized Open Front: Leaves maximum mesh area on the front so aerial roots can easily penetrate the sphagnum moss and lock in. System Components:

- Reinforced Moss Pole Module (Stackable – add as many as your plant needs)