POLYZON
Bag Clips Print-in-Place V2 - 4 Sizes w/Side Grips
Bag Clips Print-in-Place V2 - 4 Sizes w/Side Grips — Фото 2 из 4
Bag Clips Print-in-Place V2 - 4 Sizes w/Side Grips — Фото 3 из 4
Bag Clips Print-in-Place V2 - 4 Sizes w/Side Grips — Фото 4 из 4
3D-модель · MakerWorld

Bag Clips Print-in-Place V2 - 4 Sizes w/Side Grips

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 585 Лайки
  • 3 054 Загрузки
  • 2 153 Напечатали
  • 1 662 В подборках
  • 94 Бусты
  • 218 Комментарии
  • 0 Просмотры

Автор:HugoWhite

Опубликована

Скачать на MakerWorld

Описание

V2 Now Available with an upgraded locking mechanism. Added interlocking grooves where the latch meets the base so it locks in place and won't slide around. Because we're perfectionists and V1 was good but not great.

Print in Place Bag Clips - 4 Size Set

Your chip bags are going stale. Your spice packets are spilling everywhere. Regular bag clips break, disappear, or just plain suck.

These don't. Four sizes (40mm to 100mm) that handle everything from tiny spice packets to massive chip bags. They snap with authority, grip like they mean it, and actually stay closed.

Boost Me If these clips actually keep your food fresh (they will), smash that boost button. Your support lets me keep designing stuff that works. Thanks. Took 6 prototypes to nail the perfect snap feel (you can see my failures in the last photo). Now they print ready to use, no assembly, no supports, no crying over broken hinges.

Just print, crack the hinge joint once to activate it, and start clipping. That's it.

Technical Details

- Sizes: 40mm, 60mm, 80mm, 100mm - Print in place (no assembly required) - Materials: PLA or PETG recommended (PETG will have a longer lifespan) - Layer height: 0.2mm - No supports needed - Don't even think about flexible filaments

Руководства и профили печати

Профили печати и шаги

V2 - Improved Latch System 0.2mm layer, 2 walls, 15% infill

V2 - Starter Kit (One of Each Size) 0.2mm layer, 2 walls, 15% infill

V2 - 2x 40mm, 3x 60mm, 2x 80mm, 1x 100mm Quantity:

2x 40mm, 3x 60mm, 2x 80mm, 1x 100mm

Technical details: 0.2mm layer, 2 walls, 15% infill

Set of 4x40, 7x60, 5x80, 2x100 This is a Set of

4x 40mm clips

7x 60mm clips

5x 80mm clips

2x 100m clips Printed with adaptive layer height.

Теги

'kitchenfoodbagclipclampbag accesorieschipsspringprintinplacefreshmechanicalsealcamholder
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.