3D-модель · MakerWorld

Memory game

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY
Можно печатать, изменять и использовать в коммерции — с указанием автора.
Форматы
STL
  • 439 Лайки
  • 465 Загрузки
  • 257 Напечатали
  • 1 177 В подборках
  • 23 Бусты
  • 36 Комментарии
  • 0 Просмотры

Эта модель на других площадках

Автор:ideat0m

Опубликована

Описание

You can find more of my models in the collection section

-----------------------------------------------------------------------------------

EN:

A simple game similar to Pairs / Concentration or Memory where you need to remember the placement of individual stones/figures according to colors.

The playing area has 24 fields and 6 x 4 colored sets of pieces.

Players take turns rolling a die that is equipped with 6 different colors, which are the same as on the bottom of the figures.

A simple rule says “YOU ROLL THE DICE AND YOU CAN TAKE ONE PIECE FROM THE MAT. If the piece has the same color as the one on the die, the piece is TVA. If it does not have the same color, it is the turn of the next player in order.

Of course, as time progresses, more pieces are pulled out as you place them, and you can remember where the individual colors are located.

You can play the game according to several different rules:

Rule 1 – the player with the highest number of pieces wins

Rule 2 – it is possible to play in such a way that the player who puts together all 4 pieces of the same color wins the game

Rule 3 – the player who first forms a team of 6 colors of pieces wins

Of course, it is possible to come up with any other rule that you agree on with the other players at the beginning of the game

The game trains the memory and brings fun for a long time. I believe that the game will interest you and you will have fun with it. In my opinion, the recommended age is 4-5 years and up to 99 😊

------------------------------------------------------------------------------------------------

Barevne kolecka pro kostku vlozte do kostky a zajistete lepidlem. ******************************************************************************************************

Insert the colored parts for the cube into the cube and secure with glue.

------------------------------------------------------------------------------------------------------------

Vice mych modelu naleznete v sekci kolekce.

-----------------------------------------------------------------

CZ:

Jednoducha hra podobna pexesu, kdy je potřeba si zapamatovat rozmisteni jednotlivých kamenu/panacku podle barev.

Hraci plocha ma 24 poli a 6x 4 barevne sady figurek.

Hraci se stridaji v hodu kostkou, která je vybavena 6 ruznymi barvami, které jsou stejne jako na spodni casti figurek.

Jednoduche pravidlo říká „ HODIS KOSTKOU A MUZES VYTAHNOUT JEDNU FIGURKU Z PODLOZKY. Pokud figurka bude mit stejnou barvu, jako je na kostce, figurka je TVA. Pokud nemá stejnou barvu, je na tahu další hrac v poradi.

Samozrejme postupem casu se vytahuje cim dal tim vice figurek a je mozne si zapamatovat, kde jednotlive barvy jsou rozmisteny.

Hru můžete hrat podle několik ruznych pravidel:

Pravidlo 1 – vyhrava hrac, který ma nejvyšší počet figurek

Pravidlo 2 – je mozne hrat tak, ze hru vyhraje ten, kdo posklada všechny 4 figurky stejne barvy

Pravidlo 3 – vyhrava hrac, který nejdříve slozi druzstvo 6 barev figurek

Samozrejme je mozno vymyslet jakekoliv jine pravidlo, na kterem se na zacatku hry dohodnete s ostatnimi hraci

Hra procvicuje pamet a prinasi zabavu na dlouhou dobu. Verim ze Vas hra zaujme a pobavite se u ni. Doporuceny vek dle mého nazoru je 4-5 let a vyse a to az do 99 😊

*********************************************************************

Руководства и профили печати

Профили печати и шаги

Memory Game - P1P Zakladnu doporucuji vytisknout 0,2 az 0,28 vyskou vrstvy. Horni vrstva pak dle materialu treba Hilbertova krivka Jednotlive figurku je mozno tisknout s barvama, ktere se budou vkladat do kostky. Ve vysce 5,2 mm cca (podle vysky vrstvy +/-) je potreba u tiskarny s AMS dat vymenu materialu. Pokud tiskarna neni vybavena AMS, tak provest manualne, pokud je nutne dat pauzu tisku, vymenit material a pokracovat s novou barvou

****************************

I recommend printing 0.2 to 0.28 high layers for the base. The upper layer then, depending on the material, needs a Hilbert curve Individual figurines can be printed with colors that will be inserted into the cube. At a height of approx. 5.2 mm (depending on the height of the +/- layer), a material change is required for a printer with AMS data. If the printer is not equipped with AMS, then do it manually, if it is necessary to pause the print, change the material and continue with a new color

Memory game - A1mini I recommend printing 0.2 to 0.28 high layers for the base. The upper layer then, depending on the material, needs a Hilbert curve Individual figurines can be printed with colors that will be inserted into the cube. At a height of approx. 5.2 mm (depending on the height of the +/- layer), a material change is required for a printer with AMS data. If the printer is not equipped with AMS, then do it manually, if it is necessary to pause the print, change the material and continue with a new color

*********************************

Zakladnu doporucuji vytisknout 0,2 az 0,28 vyskou vrstvy. Horni vrstva pak dle materialu treba Hilbertova krivka Jednotlive figurku je mozno tisknout s barvama, ktere se budou vkladat do kostky. Ve vysce 5,2 mm cca (podle vysky vrstvy +/-) je potreba u tiskarny s AMS dat vymenu materialu. Pokud tiskarna neni vybavena AMS, tak provest manualne, pokud je nutne dat pauzu tisku, vymenit material a pokracovat s novou barvou

***********************************

0.2mm layer, 2 walls, 10% infill

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.