Iron Minion Wall Art

0.08mm layer, 2 walls, 100% infill Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mm

Filaments Used: #080a0d PLA PolyLite Black  Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4 #e2dedb PLA PolyLite White  Transmission Distance: 5

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Sunflower Yellow At layer #16 (1.36mm) swap to White for the rest.