Modular diffusor for Godox IM 22 flash - only 20g

A modular, lightweight flash diffusor for the Godox IM 22 compact flash .

Features

- Easy slide on/off design with nice snug fit - Interchangeable, snap on/off front element , so you can easily experiment with different materials (translucency) and also colors (to give your flash light a tint) - Compact , preserving the sleek look of the Godox IM 22 compact flash - Below 20g Additional considerations

- I used 0,08 mm layer height for maximum precision. - The diffusor front element uses 2 layers, which I found to be a good compromise between rigidity and translucency for the material I used (see below). - Please let the plate cool down properly . To remove the diffusor front element, I used a bed scraper for a first corner and then used the calibration line of the P1S to gradually scrape it off. - I sanded the support area slightly, but this is pure personal preference, to have everything nice and smooth. - I used Bambu Matte PLA „Matte Ivory White“ , which produces quite nice results (see pictures). - Please be aware, that you will loose 1-2 stops of light/flash power , depending on the material you use, but get softer shadows instead (see pictures).