Split Flange Snap-On Escutcheon for 1/2" PEX Pipe

I designed this two piece snap together flange/cover (otherwise known as an escutcheon) to cover up the rough-in holes for the PEX drain pipes in our cabin's new bathroom vanity and kitchen cabinets. These are similar to a design that I made for a 1.5" PVC pipe opening ( https://makerworld.com/en/models/1490983-split-flange-snap-on-escutcheon-for-1-5-pvc-pipe#profileId-1558353 ). This design has slightly different geometry to account for the smaller size. However it functions exactly the same in my experience.

I printed this in white Bambu Lab basic PLA

It has a .03" clearance around a ½" PEX pipe, which has a 5/8": diameter. PEX has a much looser industry tolerance on the outer diameter so I found it is necessary to have a print with a slightly looser fit.

Please let me know if you need any other size variants, I would be happy to model them up!

Edit: No supports! I've revised the main print profile with a new version which utilizes an angled overhang over the clip section which allows us to remove supports.