Marvel's Spider-Man Miles Morales - Hueforge Art
Marvel's Spider-Man Miles Morales - Hueforge Art — Фото 2 из 2
3D-модель · MakerWorld

Marvel's Spider-Man Miles Morales - Hueforge Art

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 61 Лайки
  • 31 Загрузки
  • 19 Напечатали
  • 128 В подборках
  • 2 Бусты
  • 4 Комментарии
  • 0 Просмотры

Автор:Lumpy3D

Опубликована

Скачать на MakerWorld

Описание

Hueforge art of the game “Marvel's Spider-Man Miles Morales” (2020)

Project: Marvel's Spider-Man Miles Morales (2020).hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Jade White for the rest.

Руководства и профили печати

Профили печати и шаги

0.08mm layer, 2 walls, 100% infill Project: Marvel's Spider-Man Miles Morales (2020).hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x199.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Jade White for the rest.

Теги

marvel's spider-man miles moralesmiles moralesspider manspidermanmarvelmarvel gamemarvel hueforgesonyplaystationps4ps5pcsteamvideo gamegamehueforgepostermilesgame postergame hueforge4 color4 color hueforgeflatplabambu basica11 amsams liteamsmmucollectiblecollectible hueforge2020insomniac games
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.