Shure SM57 + SDC Mic Clip (19mm)

Mic clip designed to be used with a Shure SM57 to couple it with an SDC (small diaphragm condenser) . This trick works beautifully for adding a little extra punch to a snare top sound in a mix. Print in photo is made with matte PLA but I suggest PETG if you plan on using this for a tour setting where it might be susceptible to direct sunlight and extreme temperature changes. Internal diameter of SDC ring is 19mm and snaps snugly on my Sennheiser e614 which is 20mm in diameter. I'll gladly add more models with an increased internal diameter for larger SDCs. Feel free to message or comment if you have a specific model you'd like one for.

Recommended Print Setting Changes

- Wall Loops - 3 - Sparse Infill Density - 30% - Spare Infill Pattern - Rectilinear