The Giulia Vase - A Botany Chic Creation - Decor

A sleek, ribbed teardrop vase designed to shine in Vase Mode . Clean lines, elegant silhouette, and a geometry that prints fast and flawlessly with a single continuous wall. Perfect as a decor piece or as a sleeve for dried/artificial flowers.

What you get

- 2 ready-to-use print profiles included:

- Vase Mode (spiralize) – one continuous wall for the lightest, fastest print. - 2-Wall Profile – two perimeters for extra strength and better water resistance.

- No supports required , minimal material usage. - Scales up or down nicely.

Recommended print settings

Vase Mode profile

- Layer height: 0.20 mm (0.16–0.28 mm works) - Perimeters: Spiral/Vase Mode ON (single wall) - Top layers: 0 · Bottom layers: 2–4 (for a sturdy base) - Flow: slightly increase if you see gaps (e.g., +3–6% ) - No infill · Supports OFF

2-Wall profile

- Perimeters: 2 - Top/Bottom: 3 (or more if you want a sealed base) - Infill: 0–10% (optional) - Great if you need more rigidity or plan to make it water-tight

Materials

- PLA : easiest, best surface finish (decor use). - PETG or ASA : recommended if you want to hold water—test for leaks first. - For true water-tightness, slow down, increase flow slightly, and consider a 0.6 mm nozzle (thicker single wall).

Notes

- Print upright as provided. - If you see faint Z-ringing on the ribs, reduce speed/acceleration a touch. - For fresh flowers, use a glass/plastic insert or seal the inside (epoxy/liner).

Enjoy the clean look—and if you need a sturdier version, the 2-Wall profile has you covered. Future-proof elegance with print-time friendly settings