Prusa Core One - Nozzle Wiper

This adds the Bambu Silicone Nozzle Wiper to the Prusa Core One.

Instructions:

- Print in PETG. - Use a M3 insert and bolt. - Use a Bambulab "Nozzle Wiper Silicone Brush" - Print in the indicated orientation (see picture). Make sure bed-adhesion is good, as there is very little surface contact. - Assuming you are using PrusaSlicer change the Start G-Code from G29 P9 X208 Y-2.5 W32 H4

to

;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method G0 X210  Y-14 Z1.5 F7500; -- NEW G0 X174 Y-18 Z1.5 F7500; -- NEW G0 X174 Y-14 Z1.5 F7500; -- NEW G0 X210  Y-18 Z1.5 F7500; -- NEW G0 X174 Y-14 Z1.5 F7500; -- NEW G0 X174 Y-18 Z1.5 F7500; -- NEW G0 X210  Y-14 Z1.5 F7500; -- NEW