Anakin Light Saber 2-piece Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

The Frame used in the picture can be found here: Modular Magnetic Frame System for Hueforge Art

The Frame is used in along with the Magnetic mount found here: Magnetic Wall Mount for Hueforge

Anakin Light Saber 2-piece Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mm

The Model is 200x400mm in size You may print at higher layer heights below the Base Thickness of 1.12mm The Max allowed Thickness is 4.32mm and the Actual Thickness is 2.04mm

Filaments Used: #000000 PLA BambuLab Basic Black  Transmission Distance: 0.1 #0a2989 PLA BambuLab Basic Blue  Transmission Distance: 2.2 #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5.7 This print uses 3 unique filaments

***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions: Start with Black At layer #4 (1.24mm) swap to Blue At layer #10 (1.48mm) swap to Jade White for the rest.

Check out my Star Wars Collection

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Boost Me If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost! Hope you enjoy! Thank you!