Customizable Snap-Lock Box (Parametric)

Snap-Lock Box (Double Lock) 80x120x40 mm

Snap-Lock Box (Single Lock) 40x40x40 mm

Snap-Lock Box (Single Lock) 65x42x85 mm

TCG Toploader Box - Two Orientations The Snap-Lock Box with dimensions modified to fit 20 toploaders for trading cards like Pokemon, Magic the Gathering, Sports Cards, etc. It also coincidentally fits up to 8 Pokemon booster packs. It might fit more or less booster packs depending on the card game.

This is meant to solve the problem of carrying around huge binders around card shows. It easily fits in your pocket. You don't have to put it down somewhere in order to browse through binders.

This 3mf file contains two different versions: one opens along the long side and the other opens along the short side. I find the one that opens along the long side is easier to open, especially with one hand. While the one that opens along the short side is easier to carry in a pocket or bag. Just pick your favorite.

I did have to go into Kong 3D's Fusion file in order to modify the lid more directly. I wanted the lid to be slightly taller than the default so that I could make the bottom half smaller. That way it's easier to thumb through your toploaders/cards. It would be nice if the height of the lid was another parametric modifier in these models!

0.2 mm Layer Height

2 Walls

15% Infill

0.2mm layer, 2 walls, 15% infill

"Optimized settings" Snap‑Lock Box (Double Lock)112×84×60 mm Optimized settings – Snap‑Lock Box (Double Lock) 112×84×60 mm

This snap‑lock box is tuned for precision and durability. Featuring a black base , red lid , and two yellow hinges (front and back), it locks securely while remaining easy to open. The dimensions (112×84×60 mm, CornerRadius 5) make it ideal for small accessories, cards, or hobby gear.

- Optimized print settings : 0.16 mm layer height, 3 walls, 10% infill - Strength : Triple walls reinforce edges for long‑term use - Detail : Fine 0.16 mm layers ensure smooth surfaces and tight tolerances - Efficiency : 10% infill keeps the box lightweight but strong - Design focus : Balanced durability and clean snap‑lock action

one color / fast print 0.2mm layer, 2 walls, 15% infill