Wolf Bookmark - Flatforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben

Wolf Bookmark - Flatforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.03x150mm in size

The model is 1.36mm thick.

Filaments Used: #000000    PLA BambuLab Basic Black  Transmission Distance: 0.2 #9199a4    PLA Panchroma PLA Translucent Grey  Transmission Distance: 6.8 #ffffff         PLA BambuLab Basic Jade White  Transmission Distance: 5.8

#ffffff         PLA SUNLU Clear  Transmission Distance: 100 This print uses 4 unique filaments

Swap Instructions: You do not set Layer Swaps in the slicer. Colors are assigned them in the Object view tab by clicking on the colored box and either pressing the number of the filament or clicking a second time and selecting from the dropdown. (This is preset in the .3MF file)

FlatForge Printing Instructions: FlatForge prints REQUIRE automatic Filament Swapping because colors are mixed throughout all layers.

This was printed face-down on a smooth high-temp build plate.

More Bookmarks can be found here

Hueforge Bookmark Book Nook can be found here

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Boost Me If you like and enjoy the model and want to encourage me to continue to make more models like this, then send me a boost! Hope you enjoy! Thank you!