Naruto Charm Frame Bookmark

Welcome to a new series of bookmarks. These bookmarks are charmed frames - each bookmark as a tassel/charm hook to attach an accessory to accompany the bookmark. There will be an attachment to the bookmark to print.

Naruto: In his classic Shadow Clone Jutsu (KageBunshinnoJutsu) pose. It has a kunai as an accessory. Use a chain or thread to attach the bookmark for an added dimension to the bookmark.

Naruto Charm Frame

Note: Use Matte White or low TD white to get a better skin look.

Pictures shown are printed in an 0.2mm Nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black  Transmission Distance: 0.6 PLA BambuLab Basic Blue  Transmission Distance: 4 PLA BambuLab Matte Ivory White  Transmission Distance: 3.5 PLA BambuLab Basic Red  Transmission Distance: 4 PLA BambuLab Basic Yellow  Transmission Distance: 6 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer (0.64mm) swap to Blue At layer (0.8mm) swap to Matte Ivory White At layer (0.96mm) swap to Black At layer (1.04mm) swap to Red At layer (1.28mm) swap to Yellow At layer (1.6mm) swap to Matte Ivory White for the rest..

More will be coming or available on Patreon .

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked , adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale , adjust the Z axis back to 100% , slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.