Ghost with Balloon

Ghost:0.2mm layer, 2 walls, 15% infill

P1S AMS Optimized | Single-Plate This profile represents a  complete and robust re-engineering  of the original print setup, focused on providing  maximum print reliability, efficiency, and safety  for multi-part, multi-color printing. This solution converts the original, cumbersome multi-plate print into a  single-plate, optimized, AMS-ready process , fundamentally improving the user experience and success rate.

Key Optimizations for Reliability and Efficiency (Substantive Value):

- Single-Plate & AMS Optimization (Efficiency & Convenience): - Modification:  The print has been consolidated from the original  three build plates down to a single plate , pre-arranged and optimized for efficient printing. - Justification:  This drastically  reduces user preparation time  and makes the entire set a single, one-click print through the AMS, significantly enhancing the user experience and efficiency. - Print-by-Object Strategy (Critical Safety Feature): - Modification:  The print sequence is set to  "Print by Object" (Object Sequencing) . - Justification:  This is a  critical reliability upgrade  for printing multiple, tall, separate figures simultaneously. It  eliminates the risk of the print head colliding  with completed parts (Ghost and Balloon stick) during movement, ensuring a  high-success-rate print , especially for tall, thin models. - Extrusion Width Adjustment for Outer Wall (0.45mm): - Modification:  The outer wall extrusion width has been deliberately set to  0.45mm  (a slight over-extrusion). - Justification:  This is a subtle yet necessary structural enhancement. The wider extrusion increases the  lateral adhesion and strength  of the outer shell, improving the  durability of the delicate balloon string and the base of the ghost , making them less prone to snapping during handling. - Seam Position Tuning (Aesthetic Quality): - Modification:  The Z-seam position has been manually set to the  backside  of the models. - Justification:  For decorative models, seam visibility is a major issue. By forcing the seam to the rear, the  highly visible front surfaces remain clean and smooth , directly enhancing the aesthetic quality of the final print.

Thank you  to the author for creating this amazing model!

Printer and Verification:  This profile has been successfully  verified with a test print on the Bambu Lab P1S printer .

1盘打印，减少收盘频率 0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill Same as original but combined the base and string assembly for better stability and simpler assembly. Prints fine in PLA and stands straight.

多色一盘打印，优化参数，提高效率