Hueforge Nissan Skyline

Habe dieses Hueforge für mein Neffen erstellt gehabt. Gedruckt auf mein H2S in Maximaler Größe.

Maße: 180x200

Hoffe gefällt euch schaut doch mal in meinen anderen Kollektion um ;)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180.75x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: #080a0d PLA PolyLite Black  Transmission Distance: 0.3 #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5 #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions:

Start with Black At layer #10 (0.88mm) swap to Cyan At layer #16 (1.36mm) swap to Beige At layer #22 (1.84mm) swap to Jade White for the rest.