POLYZON
Hollow Knight Silksong Hornet Figure
Hollow Knight Silksong Hornet Figure — Фото 2 из 5
Hollow Knight Silksong Hornet Figure — Фото 3 из 5
Hollow Knight Silksong Hornet Figure — Фото 4 из 5
Hollow Knight Silksong Hornet Figure — Фото 5 из 5
3D-модель · MakerWorld

Hollow Knight Silksong Hornet Figure

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 696 Лайки
  • 1 417 Загрузки
  • 830 Напечатали
  • 1 924 В подборках
  • 46 Бусты
  • 180 Комментарии
  • 0 Просмотры

Автор:Steelman

Опубликована

Скачать на MakerWorld

Описание

Boost Me If you like this figure, can you please give a boost? I'll continue to upload high quality models. Thanks a lot! Hollow Knight Silksong Hornet figure, height is about 5 ¼" (13cm).

The stage is colored by markers.

I printed the sword using silver silk PLA for a better appearance.

Print the body as is since the legs have been reinforced. Pay attention to the right foot when taking off the support.

There is an additional skull and three shell shards; these are optional.

Please be careful with the skull, which is very spiky.

Let me know if you have any printing issues.

Known potential issues with A1/A1 mini: the tree support for the cape may fall off. Change the support type to normal if needed.

Update 1: I added a single profile file for the cape using normal support, please let me know if you still have issues.

Руководства и профили печати

Профили печати и шаги

0.12mm layer, 2 walls, 10% infill 0.12mm layer, 2 walls

Infills have been adjusted for different parts.

One of the skull and three shards are optional.

0.12mm layer, 2 walls, 10% infill, A1 mini This profile is for A1 mini

- The sword is rotated by 45-deg. Everything else is the same.

Cape with Normal Support, 0.12mm layer, 2 walls, 10% infill For anyone who has a problem with the tree support, please try this one with the normal support. I have tested it with P1S, but it should also work for A1 and A1 mini, as this one has a better support adhesive. Let me know if you have any questions.

Теги

silksongsilksong figurehollow knighthornethollowknight
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.