Maine Coon - Cat Hueforge - Black White - 132x235

Print Instructions :

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 132.23x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2mm and the Actual Depth is 1.6mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Jade White Transmission Distance: 5.9

This print uses 2 unique filaments

Swap Instructions:

Start with Black At layer #11 (0.96mm) swap to Jade White for the rest.