3D-модель · MakerWorld

Extension box for WAGO 221 splicing connectors

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
CC-BY-NC-SA
Только некоммерческое использование с указанием автора; переделки — под той же лицензией.
Форматы
3MFSTL
  • 4 508 Лайки
  • 6 820 Загрузки
  • 4 752 Напечатали
  • 15 288 В подборках
  • 353 Бусты
  • 768 Комментарии
  • 0 Просмотры

Автор:Per Mejdal Rasmussen

Опубликована

Описание

Cable extension box using the WAGO 221 inline splicing connector.

Benefits

- Compact. - Very strong strain relief. - Mountable with countersunk screws. - You can press on the WAGOs to click them in-place, or choose not to. How to make

- Print in PETG, because it is more fire retardant than ABS or PLA. - Insert WAGO 221-2401 or WAGO 221-2411 i nline splicing connector. - Secure with M3 screws and nuts. Suggest screws are 12mm or 14mm with hex head. Other versions

- Stonger, support for splitting the connection - Stronger walls and lid. - Supports thicher cables. - Supports flat cables (seperate models). - Supports splitting the connection / junction box  (seperate models). - 8 wires - Holds up to 8 wires. - Still very compact.

Video:

Руководства и профили печати

Профили печати и шаги

3 wires, 0.2mm layer 3 wall loops (shells) for strength

2 wires, 0.2mm layer 3 wall loops (shells) for strength

4 wires, 0.2mm layer 3 wall loops (shells) for strength

5 wires, 0.2mm layer 3 wall loops (shells) for strength

All versions, transparent, 0.2mm layer 100% aligned rectilinear infill for see through effect.

3 wall loops (shells) for strength

Теги

Комментарии

Загружаем комментарии…
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.